TECHNICAL DATA SHEET FOR
SCREW LOCKING VARNISH ZK 1003
- Containing solvent nitro-combi-lacquer
- Screws protection varnish
- Fast surface and complete drying
TECHNICAL / PHYSICAL DATA
Resin / Binder
nitrocellulose- / alkydharz- combination
Colour
acc. to RAL RAL 3001 / RAL 1021 / RAL 5012 / RAL 6010 / RAL 7011
Gloss Value
matt
Original viscosity
4500 – 6500 m Pas. / Sp. 5
Thinner
EFD-Thinner 400320
Density
Calculated
1,1 g / ml + / – 0,2
Solid Content
Calculated
55 % + / – 3
Solid content in volume
Calculated
370 ml / kg + / – 20
Consumption
calculated in original viscosity, with-out application loss
64 bis 72 g / m2
dry film thickness 25 μm see “Notes“
Rate of Spread
calculated in original viscosity, with-out application loss
14,0 bis 15,5 m2 / kg
dry film thickness 25 
m see “Notes”
Storage
The production date can be found on the product label. In the original pack- ing at least 24 months, if the original packing is stored within 5 to 25 °C. Opened packages should be used immediately. Average shelf life for this product is 18 months from delivery date.
Storage beyond the 12 month period does not necessarily mean that the product is useless.
An examination of the characteristics necessary for the respective targeted application is however essential for reasons of quality assurance in such a case.
Processing and application
Application for 50mg tube
Carefully squeeze the tube and deposit the coating using the spout as a guide.
Substrates
steel, stainless steel, aluminum
must be checked – zinc and galvanized substrate.
Pretreatment
The substrate must be free of materials which prevent adhesion, e.g. oil, grease, dust and surfactant. According to the requirements we recommend to apply the suited chemical (e.g. Phosphatising, chromating) or / and mechani- cal (e.g. shot blasting) pretreatment.
Suitable surfaces
substrate: steel
top coat: coating ZK 1003
Application temperature
above 10 °C
Drying
Dust dry: air dry at 20°C after 20 Mins (% of drying 1/ DIN 53150)
Touch dry: after 30 Mins (% of drying 4/ DIN 53150)
Completely dry: after 6 days (swing beam hardness/ ISO 1522)
Oven dry: at 50°C temperature in use: max. 130°C
(object temperature) (excluded zinc and galvanized substrates)
Recommended solvent cleaner
Thinner (Nitro-cellulose thinners)
NOTES:
Safe working environment
While handling this coating we recommend the following precautions be observed. Apply the product in a well ventilated work space and wear protective clothing.
References to dangerous materials and recommendations for health and safety / environmental protection can be found in the appropriate data sheets.
Test conditions
The statements concerning efficiency, drying and caution labeling depend on colour. The values mentioned in this data sheet are based on ZK1003, signal red. All information is based on a standard climate 20/65 DIN 50014. For the calculation of the practical consumption loss additions have to be considered. Indications to this are the practical experience and advices given in DIN 53220. All information are based on our product
knowledge and experience. This information sheet is a guide for use only.
For further information please contact us.
The information stated here are reference values and are not given as a speci- fication.
Überarbeitet vom Hersteller 10. January 2019 / Version 4 / Druckdatum 10.01.2019
Producers certificate dated: 10. January 2019 / Version 4 / Printed 10.01.2019
Our technical data sheets are to advise you according to up-to-date knowledge of the product.
This information does not release you from own tests of our products in view to the ability for the intended procedures and applications. The sale of our products is through strict accordance with our terms of business and delivery.
The producer is certificated with: ISO/TS 16949: 2002 EMAS II
CONTACT
H. August Müller e.K.
Schildgasse 26, D-90403
Nuremberg, Germany
Tel: +49 (0) 911 22 62 78
Fax: +49 (0) 911 20 27 600
Customs Toll Number: 3208 10 90
TERMS OF DELIVERY
exworks
We dispatch either the same working day or the following working day, subject to availability of stock, delivery within Germany is 2-3 working days, delivery within the EU within 4-7 working days.
Our Screw Paint ZK1003 comes in an Alutube 50g = 46ml content in individual cardboard cartons.
H.August Müller e.K.
Screw Locking Varnish
Schildgasse 26, D-90403
Nuremberg, Germany
Tel: +49 (0) 911 22 62 78
Fax: +49 (0) 91120 27 600
Please fill out the form to request a SIDA Safety Datasheet.
Thank you for your request. We would be happy to give you our current product price. Please write by email or fill out the following form. We will contact you soon.
TECHNICAL DATA SHEET FOR
SCREW PAINT ZK 1003
H. August Müller e.K.
Schildgasse 26, D-90403
Nuremberg, Germany
Tel: +49 (0) 911 22 62 78
Fax: +49 (0) 91120 27 600
Customs Toll Number: 3208 10 90
TERMS OF DELIVERY
exworks
We dispatch either the same working day or the following working day, subject to availability of stock, delivery within Germany is 2-3 working days, delivery within the EU within 4-7 working days.
Our Screw Paint ZK1003 comes in an Alutube 50g = 46ml content in individual cardboard cartons.
DOWNLOAD
TECNICAL DATA SHEET
TECHNICAL / PHYSICAL DATA
Resin / Binder
nitrocellulose- / alkydharz- combination
Colour
Nach RAL 3001 / RAL / 1021 / RAL 5012 / RAL 6010 / RAL 7011
Gloss Value
matt
Original Viscosity
4500 – 6500 m Pas. / Sp. 5
Thinner
EFD-Verdünnung 400320
Density
Calculated
1,1 g / ml + / – 0,2
Solid Content
Calculated
55 % + / – 3
Solid content in volume
Calculated
370 ml / kg + / – 20
Consumption
calculated in original viscosity, with-out application loss
64 bis 72 g / m2
dry film thickness 25 μm see “Notes“
Rate of Spread
calculated in original viscosity, with-out application loss
14,0 bis 15,5 m2 / kg
dry film thickness 25 m see “Notes”
Storage
The production date can be found on the product label. In the original pack- ing at least 24 months, if the original packing is stored within 5 to 25 °C. Opened packages should be used immediately. Average shelf life for this product is 18 months from delivery date.
Storage beyond the 12 month period does not necessarily mean that the product is useless.
An examination of the characteristics necessary for the respective targeted application is however essential for reasons of quality assurance in such a case.
Substrates
steel, stainless steel, aluminum
must be checked – zinc and galvanized substrate.
Pretreatment
The substrate must be free of materials which prevent adhesion, e.g. oil, grease, dust and surfactant. According to the requirements we recommend to apply the suited chemical (e.g. Phosphatising, chromating) or / and mechani- cal (e.g. shot blasting) pretreatment.
Suitable surfaces
substrate: steel
top coat: coating ZK 1003
Application temperature
above 10 °C
Drying
Dust dry: air dry at 20°C after 20 Mins (% of drying 1/ DIN 53150)
Touch dry: after 30 Mins (% of drying 4/ DIN 53150)
Completely dry: after 6 days (swing beam hardness/ ISO 1522)
Oven dry: at 50°C temperature in use: max. 130°C
(object temperature) (excluded zinc and galvanized substrates)
Recommended solvent cleaner
Thinner (Nitro-cellulose thinners)
Hinweise zum Arbeits- und Gesundheitsschutz
Die beim Umgang mit Lacken üblichen Vorsichtsmaßnahmen zur Be- und
Entlüftung sow zum persönlichen Schutz bei der Verarbeitung sind zu
beachten. Nähere Hinweise zu gefährlichen Stoffen, sicherheitstechnischen
Eaten und Empfehlungen für den Gesundheits-/Umweltschutz können aus
dem entsprechenden Sicherheitsdatenblatt entnommen werden.
NOTES:
Safe working environment
While handling this coating we recommend the following precautions be observed. Apply the product in a well ventilated work space and wear protective clothing.
References to dangerous materials and recommendations for health and safety / environmental protection can be found in the appropriate data sheets.
Test conditions
The statements concerning efficiency, drying and caution labeling depend on colour. The values mentioned in this data sheet are based on ZK1003, signal red. All information is based on a standard climate 20/65 DIN 50014. For the calculation of the practical consumption loss additions have to be considered. Indications to this are the practical experience and advices given in DIN 53220. All information are based on our product
knowledge and experience. This information sheet is a guide for use only.
For further information please contact us.
The information stated here are reference values and are not given as a speci- fication.
Überarbeitet vom Hersteller 10. January 2019 / Version 4 / Druckdatum 10.01.2019
Producers certificate dated: 10. January 2019 / Version 4 / Printed 10.01.2019
Our technical data sheets are to advise you according to up-to-date knowledge of the product.
This information does not release you from own tests of our products in view to the ability for the intended procedures and applications. The sale of our products is through strict accordance with our terms of business and delivery.
H. August Müller e.K.
Schildgasse 26, D-90403
Nuremberg, Germany
Tel: +49 (0) 911 22 62 78
Fax: +49 (0) 91120 27 600
CONTACT
Thank you for your request. We would be happy to give you our current product price. Please write by email or fill out the following form. We will contact you soon.